Best Glue For Ceramic Repair | Top 10 Best Ceramic Glue In 2020

Have you ever wondered about the best glue for repairing your ceramic plates, or the best glue to repair your broken ceramic mug? Did your toddler wreck all the expensive china ornament in your living room? Did you mistakenly drop one of your costly ceramic plates and cannot think of what to do next but sob? Clean your tears because I’m going to present you with the best glue for ceramic repair which is waterproof and heat resistant.. Then later, we will review our list and decide the best deal for the day.

top 10 best glue for ceramic repair | best ceramic glue review in 2020

1. Gorilla 2 Part Epoxy Glue, glue for ceramics

Is gorilla glue suitable for your necessary ceramic repairs? Well, we are about to find out. Shall we?

First, the gorilla company is famous for its super strong and sticky glue. It is permanent, fast and great for numerous surface applications.

Also, it is best for very tough repairs like that china ornament that requires a durable bond. The gorilla epoxy glue dries clearly without a mess all around your household wares.

With gorilla epoxy super solvent and water resistance properties, the ceramic adhesive is unbelievably strong and durable for household and automobile repairs.

Regarding the setting time, it takes five minutes to become dry, thereby leaving you with just enough time to readjust it before it finally solidifies.

Attached to the bottom of the glue pack is an easy-to-use syringe that distributes evenly and includes a multipurpose cap to ensure that the glue doesn’t harden after some time. That’s great because you don’t want to waste your money on ceramic adhesive that will get stiff after a short while.

Pros

  • Little time to set and dry
  • Solvent resistance and waterproof
  • Very easy to use the syringe
  • It leaves the surface clean and does not make a mess
  • Very affordable

Cons

  • Ceramic glue cannot withstand high heat. Therefore, it is not food safe.
  • Although the setting time may be short, it may time extra time to solidify.

2. J-B Weld MinuteWeld Instant-Setting Epoxy, best glue for ceramic repair

The Epoxy super glue is a higher brand of the J-B Weld ceramic glue production. It is not just ceramic super glue but an epoxy meaning that it is stable and permanent in repairs.

From the name minute weld, it dries in a minute under most temperatures.

At the bottom of the superglue, there is a syringe that allows for easy mixing in the ratio 1:1. This single syringe is covered by a resealable cap that stops the glue from drying out and leaking, which makes it re-usable.

Surprisingly, the super glue has a whopping tensile strength of 2300 pounds per square inch which complements its durability.

Generally, the JB Minute weld instant setting glue is not only used for ceramics. Other surfaces you could apply the super glue to apart from ceramic are; tiles, fibreglass, plastic, wood, concrete and even glass.

Pros

  • It takes one minute for the glue to set and dry.
  • The syringe has a re-sealable cap that prevents leaking
  • The bond strength is massive
  • It adheres to surfaces instantly.
  • The epoxy is permanent in repairs.

Cons

  • It does not work well on the glass to glass surfaces
  • The epoxy may delay more take up to a day to set completely.

3. Gorilla Micro Precise Super Glue, best ceramic glue

The super deal of this gorilla micro precise super glue is that it dries in ten to forty-five seconds! Its accurate and controlled dispensing tip enhances the smooth application of the adhesive.

It is versatile because bonds to different surfaces like plastic, wood, metal, ceramic, rubber, leather and much more.

Regarding its micro precise dispensing feature, the super glue has a slender tip that allows you to use precisely the amount of glue you want.

Another thing that I observed while using the glue is that you do not need to squeeze till your fingers turn tomato red before the glue comes out. The two rubber presses at the sides make it so easy for you to use the glue comfortably.

Pros

  • It is very convenient to use
  • The glue dries very quickly at ten seconds
  • The rubber pressers at the side make it easy to dispense the glue.
  • Slender tip prevents glue from splurging out, and rubber cap covers prevent the glue from drying up.
  • Made for the comfort of the hands

Cons

  • It may not be wholly bonded together after ten seconds.

4. Elmer’s China and Glass Cement Glue, ceramic repair glue

China ornaments are ceramic antiques that are fragile; therefore, they can easily break into pieces.

However, Elmer’s glue stick China is the best super glue for broken ceramic and glass. You could also use it to fix porcelain dolls and toilet tank covers.

Due to its dishwasher safe and non-toxic property, it will be perfect for ceramic plates in the kitchen. Most importantly, you can always take it outdoors to fix, perhaps, your broken flower pot.

Pros

  • It can fix your kids toys.
  • Perfect for the oven.
  • It has a non-toxic smell.
  • Could be used outdoors to fix broken flower pots.
  • They are used to repair broken ceramic jars and bowls.

Cons

  • The bonding appears to be weak.
  • times-circle
    It dries more slowly than the set time.

5. Pratley Quickset White Epoxy,  Heat resistant glue

The best epoxy super glue for rough surfaces is the Pratley Quickset white epoxy. It bonds well to most rigid surfaces, accepting paint but resisting chemicals, oils and fuel.

The texture is as soft as cheese, and it fills large spaces that require bother fillers and adhesive strength.

Concerning the Pratley Quickset glue, it repairs your broken china plates or glass ornaments and your chipped wash hand basins. Have you ever had a hole in your racket? Not to worry because the epoxy can fix even tennis rackets.

Lastly, to all our pretty ladies out there, the quickset epoxy can be used to fix that expensive ruby necklace that’s missing its centrepiece. Everyone is happy!

Pros

  • Quick setting.
  • It has an exception in bonding strength.
  • The epoxy can be filed or sanded.
  • It will accept the paint.
  • Long-lasting shelf life.

Cons

  • It is resistant to most chemical and oils.
  • times-circle
    It may be challenging to use.
  • times-circle
    It may peel off the surface it is applied.

6. Devcon Home 2 Ton Epoxy, wood glue

The best epoxy glue for wooden repairs has just been presented to you. With a substantial tensile strength of two thousand and five hundred pounds per square inch (2500 PSI), it can bind to any surface like wood, concrete, glass, ceramics, china, permanently.

The package comes with two super epoxy types of glue. One of them is a resin which dries with a bright finish while the other one is a hardener. Both of them are water-resistant, which adds an edge to its value.

Although the two-ton Epoxy has a total drying time of thirty minutes, it surely keeps the surface of the materials together when it dries.

Generally, customers concurringly say that the Devcon Home 2 ton Epoxy is a product you would want to buy for your home repairs.

Pros

  • It has a shelf-life of over a year.
  • The epoxy can bind rough and uneven surfaces.
  • Glue is water-resistant.
  • Easier to use than the epoxy with syringes.
  • The texture is as soft as butter.

Cons

  • It is not refundable.
  • times-circle
    It may be too tacky.
  • times-circle
    The glue may dry and set before thirty minutes.

7. Strongest Super Glue by HG Power Glue

HG Power Glue has provided us with superglue that is the best for plastic, rubber, ceramics, wood, and metal. It has an outstanding shelf life of one to two years in the refrigerator.

As well, it is used for bonding, strengthening, modelling, and filling. Guess what?

It is 600% stronger than regular adhesives and can fix a broken mug, headlight bracket or a crack in a car bumper.

More so, the glue is time and money efficient. With a little amount of money, you get super glue that is waterproof, weatherproof and durable. It survives extreme temperatures from -490F to +2390F, and it is also machine proof.

Finally, the superglue is unmatched in its performance, due to its fantastic combo of glue and powder, achieving better bonds than regular adhesives.

Pros

  • Suitable for all surfaced types.
  • Six times stronger than most regular glue.
  • It can withstand extreme temperatures.
  • It possesses a shelf life of more than one to two years.
  • It is waterproof and machineable.

Cons

  • It does not work on metal.
  • times-circle
    The bond might be brittle.
  • times-circle
    Not advisable for heavy applications.
  • times-circle
    Bonds skin and eyelids together in split seconds.
  • times-circle
    Toxic fumes are dangerous to human health.

8. Red Devil Ceramic Tile Paste/Glue, ceramic tile glue

When it comes to tiles, the Red Devil tile paste is the best glue for ceramics tiles.

It’s easily applied and does not require you to smoothen up with a trowel. Also, the consistency of the paste is not too thick or runny.

For those of you who have allergies, this glue is perfect for you because it has a low odour and is VOC compliant. Red devil is also best glue for pottery repair.

Generally, ceramic tile glue is made to repair linoleum, ceramic, mosaic, or plastic tiles.

Pros

  • Perfect for tiles made from different materials.
  • Resists mildew.
  • Heat resistant.
  • Low odour and volatile organic compound (VOC) compliant.
  • Smooth paste with ideal consistency.

Cons

  • The bonding might wear off after some time.
  • times-circle
    It may arrive all dried out.

9. Gorilla Waterproof Polyurethane Glue, waterproof glue

Once again, the Gorilla manufacturers have come to surprise us still. Their waterproof polyurethane glue is incredibly strong and a versatile multifunctional super glue.

By this, I mean that it quickly bonds to wood, stone, metal, ceramic, foam, concrete, and so much more!

It is best used for uneven surfaces, both in and out of the house. The tensile strength is times three of regular adhesive glue which enables it to form deeper and stronger bonds with the materials where it is applied.

Pros

  • It is 100% waterproof.
  • It can be used to fix indoor and outdoor items.
  • The gorilla super glue is versatile
  • Expands three times into the material it is on to form a stronger bond.

Cons

  • It is not the right choice for all repairs.

10. Loctite Super Glue Gel Tube

The easy to use super glue by Loctite is very handy and miniature. With two grams in weight, it is just the right glue when you are on-the-move.

Highly resistant to moisture, most chemicals and freezing temperatures, its shelf life has been increased to make sure your money is valuable.

More so, the ceramic super glue gel is a self-piercing tube which opens up when you screw the cap tightly. While providing a bright finish, it dries completely without making a mess.

Pros

  • Easy to use and dispense.
  • Resistant to moisture
  • It is not affected by freezing temperatures
  • It dries clearly with making a mess.

Cons

  • It is not suitable for high temperatures.
  • times-circle
    It cannot complete large projects.
  • times-circle
    It might solidify inside the tube

What is ceramic

Ceramic is the art of creating objects in three different materials: porcelain, earthenware, and neighborhood. Ceramics is not only the discipline but the set of objects that are produced and the knowledge about these objects.

Then the cooking was implemented and more geometric models began to appear, and it was the birth of pottery, which is the art of creating earthenware vessels.

The first to apply advanced cooking techniques were the Chinese, and this knowledge later spread to the West. The materials and techniques that are developed in ceramics are:

Porcelain: it is a hard and translucent material that is usually white in color. It was developed by the Chinese between the 7th and 8th centuries

Cooked earth: it is the oldest form. It dates back to the 3rd century BC. It is modeled and fired clay.

Earthenware: these are more elaborate materials, linked to ceramics.

Best ceramic glues

If you want to glue some ceramic piece or even if you want to know how to glue broken ceramics and you do not know how here I will share the best glues for ceramics.

Resin glues

The resin glues come in two tubes. One is glue and the other is a hardener. When both components are mixed, the product solidifies. For medium jobs, the epoxy glue variety is used, which dries firmly in six hours. For very small things there is a variety that dries in about five or ten minutes.

If the pieces to be glued are large, there is a special epoxy ceramic adhesive that makes the joints practically invisible. They are more expensive and are recommended for quality work.

Polyvinyl acetate glue

This glue comes prepared in a single tube. It is the one that is generally used to stick terracotta objects. It is necessary to moisten the edge of the joints to avoid the absorption of the glue because otherwise, the bonding will weaken.

Cyanoacrylate glues

Also called super collages, they are widely used for pasture porcelain, that is, original porcelain.

How to use glue on different surfaces

Ceramic can be glued to different materials, but there are some basic issues to consider in each case. Learn here how to glue ceramics on different surfaces.

Wood

How to glue ceramics on wood? While it may be a bit more complicated, it is not impossible. Wood has the characteristic that it is a porous material, so this detail must be taken into account when choosing the correct glue.

Another point to consider is the direction in which the ceramic will be glued. It is not the same if you stick it on the wall than on a wooden floor or desk.

In this case, we recommend silicone-based cement. You must place it on the ceramic and keep it firm for a few minutes. It may take a while but it is my cash.

Wall

To glue ceramics on the wall, there is ceramic cement. Gluing ceramics or tiles on the floor is like gluing ceramics on the wall, you can use the same ceramic adhesive. It comes in different sizes and is the most widely used for covering in bathrooms and kitchens.

Ceramics

To glue ceramic on ceramic, resin glues are the most suitable. It is very important that both surfaces are well filed and clean so that the ceramic glue is effective and durable for ceramic coffee mug, plate, and bowl.

How to choose the best adhesive for ceramics

Before starting the adventure of installation, there are some things that you should take into account: what type of adhesive should we use depending on the type of ceramic that we are going to install? What glue is used to bond ceramics?

One of the most important things when installing both floor and wall ceramics is the adhesive to be used. It is necessary to know which adhesive will be needed according to the needs of both the area where it will be installed and the installer.

For starters, what is the adhesive?

It is the material used to adhere or glue the ceramic tile in the appropriate area, be it floor or wall. This material, when mixed with the correct amount of water, forms a paste that is placed both in the base area of the installation, already clean and of the same title free of impurities.

Let's prepare the ceramic adhesive

The correct way to prepare the adhesive paste is very simple.

We open the adhesive packaging and place it in a container with clean water. The container must be of a considerable size, depending on the amount of mixture that we are going to prepare.

When we have already put the adhesive in the container with water, we will begin to stir until forming a perfect mixture. We will eliminate all the lumps that have formed. The mixture must maintain a pasty consistency, neither watery nor very thick.

In case the paste is very liquid, it will be necessary to add more adhesive. Similarly, if the pasta is very solid, we will add a little water. We must have a suitable consistency: creamy.

Before applying the adhesive, make sure the area is level and clean of grease, paint or dust. We must remove all impurities from the floor or wall, as well as from the ceramic, to ensure better adhesion of the materials. We will use the double application method, both on the surface and on the tile.

Ceramic Adhesive Types

AcrylPro

AcrylPro, which you can learn about here,  is a high-performance chew type adhesive for interior installations on drywall, plywood, concrete, and existing ceramic. It is used on surfaces where a greater adhesion force is required. It allows installing formats of up to 30 cm x 30 cm for both floor and wall. It is an adhesive that is ready to apply, it has this advantage over those that are cement-based.

EBM-Lite Epoxy Adhesive

EBM-Lite Epoxy Adhesive has an exclusive and cutting-edge technological formula. EBM-Lite provides anti-sag and anti-slip characteristics that allow the mortar to resist any type of irregularity and thus keep the tile or ceramic in place. 100% epoxy and solid, made with recycled materials, two components.

Cement-based adhesives

Cement-based adhesives are various. They are for low and no water absorption ceramic floors with formats up to 60 cm x 60 cm. The adhesive layer must not exceed 10 mm thick.

  • The  Porcelain Adhesive is suitable for formats up to 60 cm x 60 cm; It is designed for the installation of porcelain tiles or porcelain floors on unpolished concrete surfaces. It has a presentation of 20 kg and is gray.
  • The  Gray Floor Adhesive has a high technology used in its manufacture that provides total dispersion of its components giving greater body and quality to the mixture made, thus offering greater performance at a lower cost. It has a presentation of 20 kg.
  • The  Adhesive Gray Fast is designed for installations that require emboquillarse after six hours of being installed. It allows moderate traffic after 12 hours of installation. It has a presentation of 20 kg.
  • hand-o-right
    The  Special Large Format Porcelain Adhesive for installing porcelain, red body ceramic, and large natural stone. It is a medium layer adhesive with anti-sag properties. It has two presentations of 20 and 50 kg and is used for formats of more than 60 cm x 60 cm. The adhesive layer used in the installation must be about 20 mm thick.
  • hand-o-right
    The adhesive PSP White / Gray is a glue On Floor Apartment is an excellent choice for residential and commercial remodeling in which the time and cost play an important role. With this adhesive, it is no longer necessary to lift a previously installed floor since the new one is placed on it. It has a presentation of 10 kg.
  • hand-o-right
    The  Adhesive Pegazulejo is formulated based on white cement, sand or carbonate and special chemicals. It is made for installations of formats smaller than 33 cm x 30 cm indoors.
  • hand-o-right
    The  Adhesive White Premier Anti - Slip comes in a presentation of 20 kg. It maintains its stability and is designed for large size tiles.

After learning about the different types of adhesives, you will know which one fits your needs. If you still have doubts, do not think about it so much and contact us through our social networks. Or, if you prefer, come to our stores where Interceramic experts will give you all the details you need.

What are the characteristics of the ceramic glue?

For starters, one of the main characteristics of these ceramic glues is that they do not have to be soluble in water since these materials are usually used as plates for food or glasses for different drinks.

In addition, currently, there are different methods to clean our dishes, such as dishwashers or manually, so it is important that the union lasts and does not dissolve in contact with the different cleaning products, as well as the water itself.

Another important fact of this type of adhesive is that they do not contain solvents, so they are non-toxic and can be used within the food and household sectors.

We all know the fragility of ceramics and porcelain, which at the time of breakage occur microcracks and is an area where dirt is accumulated largely certainly due to its porosity.

This fact causes ugly or grayish colors in the joints repaired with glue and, although it is difficult to avoid, it is possible to avoid it to a great extent simply by making the joint with glue as soon as possible.

If this is not possible, we recommend that you spread the edges with a bleaching liquid, such as hydrogen peroxide ( hydrogen peroxide of 110 volumes).

Finally, it should be noted that when ceramic or porcelain fragments are missing in the part to be repaired, it is possible to make a small mold by applying ceramic epoxy-type putties . Although we will talk about this at the end of the article.

How to use acetate ceramic glue?

In order to repair porcelain or ceramic pieces, once you have purchased any of the products described above, you will need to follow these steps :

  • Clean the surfaces to be fixed, as they must be dry, clean and free of grease.
  • In the case of being two-component glue, premix the two products.
  • Apply it on both sides at the breakpoints and let it dry.Apply it on both sides at the breakpoints and let it dry.
  • Reapply the glue on one side and put the pieces together immediately.
  • Let it dry 24 hours.
  • If it is objects such as tableware, plates or porcelain, it is recommended to wash it with hot water before using it again.

However, if you are not completely clear about the steps, then we provide you with a video tutorial where he explains perfectly how to repair tableware with ceramic glue.

How to use the epoxy ceramic glue?

It should be noted that we have a section on the web where we talk about all the aspects of epoxy glue and how to use it properly.

However, in order to optimize your time to the maximum, we indicate the most important steps for the correct use of this type of glue on ceramic or porcelain. They are also best glue for porcelain repair.

  • The surfaces to be joined must be clean of grease, dust or dirt and dry.
  • Dispense equal amounts on a clean, disposable surface. Cap the tubes without inverting caps.
  • Mix both components well with the spatula until obtaining a homogeneous mixture.
  • check-square-o
    Apply a thin layer of the mixture on the 2 surfaces and join.
  • check-square-o
    Keep the pieces together for a minimum of 20 minutes.
Tips for using the ceramic glue of your choice:

Make sure the surfaces to be joined are clean, dry and fit perfectly.

Apply a drop of glue to one of the surfaces to be glued and immediately press the surfaces against each other. For optimum precision hold the pieces until they are very firm.

In case you have excess glue, don't worry, it can be easily removed once the glue dries. As soon as it has dried, scrape off using a gently sharpened knife, sand with a piece of fine sandpaper, or clean with a cloth soaked in nail polish remover containing acetone.

Leave to act for at least an hour before putting the container in contact with the liquid. Wait the next day for the best results.

Immediately recap the glue tube or container and store it upright in a cool, dry place.

frequently asked Question

What is gorilla glue?

Gorilla is a strong and heat resistant glue. They are multi-purpose glue to fix your variety of things. There are 3 types of gorilla glue such as popular gorilla tape, gorilla gel, and gorilla epoxy. This glue works instantly and gives you a better result. You can use it on any household products, indoor and outdoor products to repair them as well.

Is gorilla waterproof glue?

The gorilla glue is a multi-purpose glue on the market. They work well on so many surfaces. They are truly 100% waterproof. It doesn't break down when exposed to the outdoor elements.

The waterproof features are great for fixing product that stays near to water. They are incredibly strong, versatile, and leading multi-purpose waterproof glue. So, you could use this glue on water based product without any doubt.

It's safe for indoor and outdoor use and strong enough to stand up to the element. Fix your adorable things with this water-resistant glue and use it again.

Is gorilla glue heat resistant?

Many people asking, are gorilla glue and gorilla super glue gel water and heat resistant? The answer is yes. Gorilla glue is water and heat resistant. Gorilla glue ceramic can work well in temperature as high as 200 degrees Fahrenheit to 220 degrees Fahrenheit.

So, you could use this glue as high-temperature as 200 degrees to 220 degrees Fahrenheit. Most of the glue fails to work at a high temperature. But, gorilla ceramic glue high temperature food safe.

That's why gorilla glue ceramic called heat-resistant glue. The gorilla epoxy is also heat resistant. They are very strong adhesive and are solvent resistant.

It is also weather resistant. They made with incredibly strong, permanent, butyl adhesive, and weather-resistant shell. This glue works weather as well.

This product suitable for repairing the broken ceramic, cracking metal, and pilling caused by heat, sunlight, cold. They are works well both weather hot and cold.

Is gorilla glue food safe?

This is the best reasonable question, are ceramic glue food safe? Most of the people also asking, what is food safe ceramic glue? The food-safe means safe for a contract with food. To repair ceramic plate, cup, mug, and bowl, you'll need food-safe glue.

In this case, you can use gorilla glue to fix this food contracting adorable thing. Because gorilla glue is one of the food safe glue. Gorilla is FDA approved glue that you could apply on a plate or bowl for fixing.

How much is gorilla glue?

There are several sizes of gorilla glue that are different prices. But normally the best gorilla glue price is cheap. If you looking for the top-rated gorilla glues price, most of the gorilla glue is under $ 7. On the amazon store, gorilla glue gel 20 gram $ 5.97, gorilla wood glue 8 ounces bottle $ 8.94, gorilla 2 part epoxy 0.85 ounces $ 4.97, and gorilla white waterproof polyurethane glue 2 ounces $ 4.84. Check on the above list for the latest price.

Will gorilla glue work on plastic?

The gorilla glue epoxy works very well on many types of plastic. Do you know what is the best glue for plastic? Loctite and gorilla glue is the best glue for plastic. It is a clear liquid that has heat-resistant, waterproof features.

So, they are suitable for repairing any type of plastic. But we do not recommend for use on rubber with high oil, polypropylene (PP), polyethylene (PE), and plasticizer.

Is gorilla glue wor on metal?

If you looking for a glue that is the best glue for metal, only gorilla glue works better on metal. Polyurethane based gorilla glue and cyanoacrylate based gorilla super glue adhesive will both work on metal. There is no other glue that works better on metal. However, you could try gorilla glue to fix your metal crack.

Can gorilla glue be used on wood?

What is the strongest glue to be used on wood? The polyurethane-based glue is one of the strongest and most durable types of wood glue. Whether gorilla wood glue is one of the most popular polyurethane-based wood glue available on the market.

All right, the gorilla wood glue is an adhesive that many carpenters, woodworkers, and hobbyists trust for their woodworking project. This PVA gorilla glue is incredibly waterproof and dries a natural color that offers an invisible bond line for your wood project.

Will gorilla glue work on glass?

Yes, they work well on glass surfaces. For fixing glass with this glue, lightly clean the glass surface with water then apply the glue on the broken glass surface. Do not mix water and glue. To fix your glass, you can also use the Loctite glue for better results.

A final note to readers

Dear readers,

Hooray!! You made it to the end of the discussion. Let us analyze what we have discussed. First of all, we were able to list the top 10 best glue for ceramic repairs, their features, pros, and cons.

After all this, we have come to the crossroads of our journey. How will you pick the best glue for broken items you want to repair? Are you having a tough time deciding? Well, let me help you out.

From what we have discussed today, the best choice is going to…HG’s Strongest Super Glue!!! With its pros overruling its cons and the highest number of positive reviews, it will be best to go for it, although you have to be wary of skin contact.

Also, if you do not agree with this answer, you can always choose the one that caught your eye the most. In all, I say to you my friends, au revoir!

Leave a Reply